Have you tried Steelcalc 7 yet? - For a free Demo copy of Steelcalc click on the above link Request Demo to register for a Steelcalc Demo Account. Once an account has been created you can download and try the Steelcalc 7 Demo. Restrictions do apply to the Demo version. The Demo licence will expiry after two or more library releases.

Click here for history of any library changes.

Note : Updates depend on the licence you have purchased. Library Multi Test System are for licences ending in 0000 and Library EN(ETA) are for licences ending in 9001. There are other licences where none of these library updates apply but changes to the Steelcalc software will, also some licences (Own Product) only show certain manufacturer product updates so some of the updates shown below may not apply to those licences.

---

All New Steelcalc version 7

FPSI Limited is proud to present the latest version of Steelcalc. The latest version includes the ability to create Eurocode and BS5950 projects. This facility is available in our Multi Test Data system licence. All users with an existing BS476-21 licence will automatically receive the new loading data.

Please take the time to read through the What's Changed section in the Steelcalc help file once you have updated. The helps contains all the information you required to get started.

FPSI Limited would like to thank all their users for their continued support and help.

Feedback and suggestions to make Steelcalc even better are always welcome.

Take a brief look at what's new in Steelcalc Version 7 - View Details

---

 

Steelcalc Version 7.0.6 (16/03/2021) Released with Library 111 Release 1 Update (16/03/2021)

• No software changes

Intumescent Range

• Nullifire - Nullifire SC804 - Changes to loadings data.

Full Range

• Updated all product certification where required.

Intumescent Range

• Nullifire - Nullifire SC804 - Added to Product Range

---

 

Steelcalc Version 7.0.5 (04/03/2021) Released with Library 110 Release 1 Update (04/03/2021)

• No software changes

Intumescent Range

• Sherwin Williams - Firetex FX6002 - Changes to loadings data.

Full Range

• Updated all product certification where required.

Intumescent Range

• Sherwin Williams - Firetex FX6002 - Changes to loadings data.

---

 

Steelcalc Version 7.0.4 (15/02/2021) Released with Library 109 Release 1 Update (15/02/2021)

• Cost Adjuster Added per Lin.M to available Overhead Types.
• Totals and Report Builder If user did not select to use Container calculations then the resulting container quantities would show the Litre calculations on a project set as kg. Fixed.

Full Range

• Updated all product certification where required.

Full Range

• Updated all product certification where required.

Full Range

• Updated all product certification where required.

---

 

Steelcalc Version 7.0.3 (04/12/2020) Released with Library 108 Release 1 Update (04/12/2020)

• Cost Adjuster System Sprays - Failed to update totals when adding overheads - Fixed
• Specials Editor Updated help file and visual display in Specials Editor.
• Numeric Inputs Removing the values on some inputs caused an unexpected error - Fixed
• Project Grid Hierarchy grid - Right mouse click on Zone caused unexpected error - Fixed

Full Range

• Updated all product certification where required.

Full Range

• Updated all product certification where required.

Full Range

• Updated all product certification where required.

---

 

Steelcalc Version 7.0.2 (25/11/2020) Released with Library 107 Release 1 Update (25/11/2020)

• No Software Changes

Intumescent Range

• Nullifire - SC804 - Added Cellular Beams
• Jotun Paint (Europe) Limited - Steelmaster 60SB - Updated loading data

Intumescent Range

• PPG Coatings Europe BV - Steelguard 751/851 - Updated loading data

---

 

Steelcalc Version 7.0.1 (09/11/2020) Released with Library 106 Release 1 Update (21/10/2020)

• Latest fixes for Steelcalc Version 7.0.1
• New option available in Steelcalc Default Printer facility. You can now disable the use of a default printer. This helps if you use a shared network printer on a server that is not available.
• Some reports failed to show any information in the report header or sub header sections. Fixed

• No changes to the library data.

---

 

Steelcalc Version 7.0.0 (21/10/2020) Released with Library 106 Release 1 Update (21/10/2020)

• New Steelcalc Version 7
• Steelcalc version 7 now includes the ability to produce Eurocode and BS5950 projects

New Range of Products

• Bollom Fire Protection Brosteel Ultra 60
• PPG Protective & Marine Coatings Steelguard 651, 701 and 801
• Sherwin Williams Firetex Range, FX1003, FX2003, FX5062, FX5090, FX6000, FX6002 and FX9500
• Hempel UK Limited Hempacore AQ, Hempacore One, Hempfire Pro 315 and Hempfire Optima 500
• International Paint Limited Interchar Range, 1290, 2090 and 212
• Polyseam Protecta FR-1
• Tremco CPG UK Limited SC601, SC602, SC801-120, SC802, SC901 and SC902
• Jotun Paints (Europe) Limited Steelmaster Range, 60SB, 120SB, 600WF and 1200WF
• Sika Deutschland GmbH Unitherm Platinum and Unitherm Platinum-120

Intumescent Range

• Sherwin Williams Firetex FX5090 - Changes to HS Beams loading data.
• Sherwin Williams Firetex FX1003 - Changes to HS loading data.
• Sherwin Williams Firetex FX6002 - Changes to loading data.
• Tremco CPG UK Limited SC901 - Changes to container sizes.

Board Range

• Cryotherm Insulation Limited Spiralite Screw Fix - Changes to CHS loading data.
• Rockwool Limited All BeamClad products updated.
• Etex Building Performance Limited Supalux - Changes to HS loading data.
• Etex Building Performance Limited Vermiculux S - Changes to CHS loading data.

Full Range

• PPG Protective & Marine Coatings Steelguard 701/2 & 801/2 - Changes to source and date information.
• Tremco CPG UK Limited Nullifire SC803 - Changes to source and date information.
• Tremco CPG UK Limited SC901 - Changes to container sizes.

---