Steelcalc Version 6.4.21 (15/08/2020) Released with Library 105 Release 1 Update (15/08/2020)
Intumescent Range
- New Product - Polyseam Limited Protecta FR-1 - White waterborne acrylic intumescent coating.
Spray Range
- Promat UK Limited Cafco 300 - Changes to loading data.
- Isolatek International (Europe) Limited Isolatek Type 300 - Changes to loading data.
Board Range
- New Product - Etex Building Performance Limited Vermiculux S - Lightweight calcium silicate insulating board.
- Promat UK Limited - Fendolite MII
- Isolatek International (Europe) Limited - Isolatek Type MII
- Etex Building Performance Limited - Vermiculux
Steelcalc Version 6.4.20 (24/06/2020) Released with Library 104 Release 1 Update (24/06/2020)
Intumescent Range
- PPG Protective & Marine Coatings Steelguard 651 - Changes to loading data.
- Sherwin Williams Firetex FX9500 - Change to RHS/SHS loading data.
- Jotun Paints (Europe) Limited Steelmaster 60SB - Changes to loading data.
- Change of Supplier Name Nullifire to Tremco CPG UK Limited
Full Range
- Change of Supplier Name Nullifire to Tremco CPG UK Limited
Steelcalc Version 6.4.19 (26/05/2020) Released with Library 103 Release 1 Update (26/05/2020)
Intumescent Range
- Jotun Paints (Europe) Limited Steelmaster 120SB - Changes to loading data.
- Hempel UK Limited Hempafire Optima 500 - Change to source and data information.
- Nullifire SC804 - Changes to loading data.
- PPG Protective & Marine Coatings Change to Topseal Steelguard 2458.
Full Range
- PPG Protective & Marine Coatings Change to Topseal Steelguard 2458.
Steelcalc Version 6.4.18 (05/05/2020) Released with Library 102 Release 1 Update (05/05/2020)
Intumescent Range
- New Product - Hempal UK Limited - Hempafire Optima 500 - White, water bourne Intumescent.
- Jotun Paints - Steelmaster 60SB - Changes to Topseals and Specific Gravity.
- Jotun Paints - Steelmaster 120SB - Changes to Topseals and Specific Gravity.
- Jotun Paints - Steelmaster 600WF - Changes to Topseals.
- Jotun Paints - Steelmaster 1200WF - Changes to Topseals and Specific Gravity.
- Nullifire - SC601-SC602 - Amendment to CHS 60min loading data.
- Nullifire - SC801-120 - Changes to loading data.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
- Jotun Paints (Europe) Limited - Steelmaster 60/120.
- Jotun Paints (Europe) Limited - Steelmaster 60WB.
Steelcalc Version 6.4.17 (02/04/2020) Released with Library 101 Release 1 Update (02/04/2020)
Intumescent Range
- Sika Deutschland GmbH - Unitherm Platinum - Changes to loading data.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.16 (12/03/2020) Released with Library 100 Release 1 Update (12/03/2020)
Intumescent Range
- Nullifire - Nullifire SC601/SC602 - Changes to loading data.
- Nullifire - Nullifire SC801-120 - Changes to loading data.
- Nullifire - Nullifire SC802 - Changes to loading data.
- Nullifire - Nullifire SC901/SC902 - Changes to loading data.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
- Phoenix Fire Protection (Asia) - Phoenix 370-60.
- Phoenix Fire Protection (Asia) - Phoenix 370-90.
- Phoenix Fire Protection (Asia) - Phoenix 170-120.
- Sika Deutschland GmbH - Unitherm Steel S.
- Sika Deutschland GmbH - Unitherm W-30.
Steelcalc Version 6.4.15 (06/02/2020) Released with Library 99 Release 1 Update (06/02/2020)
Intumescent Range
- New Product - Hempel UK Limited - Hempafire Pro 315 - White, solvent borne Intumescent.
- New Product - Hempel UK Limited - Hempacore One - White, solvent borne Intumescent.
- New Product - Hempel UK Limited - Hempacore AQ - White, water borne Intumescent.
- New Product - International Paints - Interchar 3120 - Light grey, solvent free epoxy Intumescent.
- Nullifire - Nullifire SC901/SC902 - Changes to loading data.
- Nullifire - Nullifire SC804 - Changes to loading data. RHS/SHS/CHS added
- International Paints - Interchar 1290 - Changes to Topseals.
- International Paints - Interchar 212 - Hollow Section Columns added.
Full Range
- Nullifire - Nullifire SC901 - Changes to CHS loading data.
- PPG Protective & Marine Coatings - Steelguard 651 - Changes to loading data.
- International Paints - Interchar 963.
- International Paints - Interchar 973.
- International Paints - Interchar 1120.
- PPG Protective & Marine Coatings - Steelguard 562.
- PPG Protective & Marine Coatings - Steelguard 563.
- PPG Protective & Marine Coatings - Steelguard 564.
Steelcalc Version 6.4.14 (16/12/2019) Released with Library 98 Release 1 Update (16/12/2019)
Intumescent Range
- Nullifire - Nullifire SC804 - Changes to loading data.
Steelcalc Version 6.4.13 (21/11/2019) Released with Library 97 Release 1 Update (21/11/2019)
Intumescent Range
- Nullifire - Nullifire SC601 - Changes to RHS loading data.
- New Product - Nullifire SC804 - Thin film white, water based Intumescent.
Steelcalc Version 6.4.12 (01/11/2019) Released with Library 96 Release 1 Update (01/11/2019)
Intumescent Range
- New Product - Nullifire SC601/SC602 - Thin film off-white, solvent based Intumescent.
- PPG Protective & Marine Coatings - Steelguard 564/581/585.
Steelcalc Version 6.4.11 (17/09/2019) Released with Library 95 Release 1 Update (17/09/2019)
Intumescent Range
- Note : Some products within the Steelcalc library have been split into individual products.
- PPG Protective & Marine Coatings - Steelguard 549/550/560 - Now - Steelguard 549, Steelguard 550, Steelguard 560
- PPG Protective & Marine Coatings - Steelguard 701/801 - Now - Steelguard 701, Steelguard 801
- PPG Protective & Marine Coatings - Steelguard 751/851 - Now - Steelguard 751, Steelguard 851
- Sherwin Williams - M95/02 - Available outside of the UK
- Sherwin Williams - FX5090 - Changes to loading data
- Sherwin Williams - FX1003/2003 - Changes to loading data
- Sherwin Williams - FX9500 - Changes to loading data
- Nullifire - SC802 - Changes to loading data
- International Paints - Interchar 212 - Changes to loading data
- International Paints - Interchar 1260 - Changes to loading data
- Sherwin Williams - FX5060 and FX5120.
- Nullifire - S708-60
Full Range
- New Product - Nullifire - Nullifire SC803 - Low VOC, white water based intumescent
- New Product - Nullifire - Nullifire SC901 and SC902 - Pale blue, fast track, one coat, two part thin film intumescent
Steelcalc Version 6.4.10 (14/06/2019) Released with Library 94 Release 1 Update (14/06/2019)
Intumescent Range
- Bollom Fire Protection - Brosteel Ultra 60 - This is a replacement product with the same title. Revisions to existing projects will alter all data to this new product. Lock down your project, if you do not want this to happen.
- Nullifire - S707-60 and S606.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.9 (26/03/2019) Released with Library 93 Release 1 Update (26/03/2019)
Full Range
- Amendments to European Steel Sizes . Angles L 250, L 180, L 160 and L 130 ranges.
Intumescent Range
- Sherwin Williams Protective & Marine Coatings - Firetex FX9500 - Added 30 minutes loadings.
- PPG Protective & Marine Coatings - Steelguard 751/851 - Added Cellular Beam sections to available steel type sections and amended CHS data to available steel type sections.
Boards Range
- New product - Knauf Insulation - Knauf Fire-teK Beam and Column - Rock mineral fibre slab - Fixing System 1 - Combination.
- New product - Knauf Insulation - Knauf Fire-teK Dry Fix - Rock mineral fibre slab - Noggings
- Berger Paints Emirates Ltd Co (LLC) - Apcochar WB100, Apcochar WB105, Apcochar SB200.
- Knauf Insulation Ltd - Rocksilk Firetech.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.7 (12/11/2018) Released with Library 91 Release 1 Update (12/11/2018)
Full Range
- Amendments to European and Australasia Steel Sizes . Angles L 100x75 range, 75x30x3 RHS and Universal Columns 245 SC 71, 200 UC 52.2, 150 UC 30.
- New Product - Sherwin Williams Protective & Marine Coatings - Firetex FX6002 - Three component, grey fast-drying Intumescent.
- Sherwin Williams Protective & Marine Coatings - Firetex M95
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.6 (21/09/2018) Released with Library 90 Release 1 Update (20/08/2018)
- Reported Error : Steelcalc was unable to create a new project when user selected not to use the Cost Centre data. Fixed.
- Non Reported Error : Consolidated Reports not showing Girth data correctly. Fixed.
- Reported Error : Steelcalc would terminated incorrectly when using Plate Girders Partials. Fixed.
- Note : Steelcalc is unable to open or use Steelcalc Projects that are linked to a synced folder like Dropbox or OneDrive. This is due to Steelcalc requiring a project that is not already in use. When a sync folder copies, because of a change to the project, it will lock the file so you cannot use your projects. A warning will now given if you attempt to add or open a project from any of these folders.
- New Facility : Due to the note above there is now a facility where you can copy your currently opened project to a selected folder of your choice. This is available from the main menu bar.
Full Range
- Added New Steel Sizes to the Australasia Range. Added Universal Beams and Universal Columns.
- International Paints Limited - Interchar 1290 - Added I Section data up to 1.5 hrs.
- New Product - Jotun Paints (Europe) Limited - Steelmaster 600WF - White water borne Intumescent.
- Nullifire - S605
- Bollom Fire Protection - Fireshield Ultra Universal
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.2 (25/06/2018) Released with Library 89 Release 1 Update (25/06/2018)
- Important updates : Updates to the download digital licence, full licence data and security.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Full Range
- Maintenance changes to all products where required - No Changes to loading data.
Steelcalc Version 6.4.1 (12/03/2018) Released with Library 88 Release 1 Update (12/03/2018)
- All Steelcalc software is now digitally signed : Steelcalc downloads and application software are now fully verified by a digital coding certificate. This means that when you download the latest updates or run the Steelcalc software you can be confident that the code you use has not been altered or compromised by a third party.
Intumescent Range
- Updated expiry date on all known Certifire Certificates.
- Updated all Products on the ASFP Cellular Beam register.
- Jotun Paints(Europe)Limited - Steelmaster 60WB - Added to ASFP Cellular Beam Register.
- Jotun Paints(Europe)Limited - Steelmaster 1200WF - Added to ASFP Cellular Beam Register.
- Nullifire - SC902 - Changes to loading data.
Steelcalc Version 6.4.0 (22/01/2018) Released with Library 87 Release 1 Update (22/01/2018)
- Major change to the installation wizard : A new installation wizard has been built and now includes the ability to install Steelcalc as a Per Machine installation. All installations pre Steelcalc 6.4.0 were installed as a Per User installation where the user needed to have Administrator Rights on their Windows Account, this is no longer a requirement. If you upgrade any Steelcalc pre 6.4.0 then this installation type will still apply. To found out how to remove the Per User installation then please see the Steelcalc help for more information.
- Improvements : The ability to allow Multi Users on the same machine. Per User installation must be removed first.
- Improvements : A new girth calculator has been included. This can be used to calculate a required girth of a Non-Standard steel section.
- Improvements : You are now able to save your current Steelcalc settings to a file on your machine. These settings include all your selections through the Set Report Options. These settings can then be imported back into your system at anytime.
- Improvements : Product Data Information Report - The Intumescent report now shows the Expiry Date of a Certifire Certificate.
- Improvements : Estimators Assistant - Consolidated Graph - This graph enables you to select any steel size and steel type from the records produced in the Estimators Assistant facility. The graph will show you each individual loading for each product selected.
- Improvements : Set Report Options - Summary Report - You can select to hide Item, Length or m² details from the report.
- Bug Fix : overflow error when using Centre Line calculations on a Spray m² project : Fixed
Intumescent Range
Updated expiry date on all known Certifire Certificates.
- Firetherm - Firesteel Classic 120
- Firetherm - Firesteel 60WB
- Firetherm - Firesteel SB120 Elite
- Correction to - PPG Protective and Marine Coatings - Steelguard 651 - Updates to loading data.
Steelcalc Version 6.3.21 (18/10/2017) Released with Library 85 Update (18/10/2017)
- Bug Fix : Cost Adjuster did not use the Selling Price column in Clients Reports when using the Application Rate by Girth facility. This error only happened if Lin.M costing was required. Fixed.
- PPG Protective and Marine Coatings - Steelguard 651 - Changes to loading data and update to Source and Date information.
Steelcalc Version 6.3.20 (04/07/2017) Released with Library 84 Update (04/07/2017)
- Bug Fix : Copying and transferring partial type steel sections from Intumescents to Sprays caused an invalid A/V error. Fixed
- Bug Fix : Totals and Report Builder : Some products where the default container unit is kg were failing to calculate the container values. This caused an Overflow error message. Fixed
- Improvements - Cost Centre facility - Where applicable Steelcalc will keep the currently selected product as the default selection in all Cost Centre tabs.
- Improvements - All Reports - In Set Report Options (All Reports) you can now select to Show the girth of a steel section while hiding the SteelID column.
- Improvements - Plate Girder Calculator - When using Plate Girder Partials if your entered exposed section matches the height of the bottom flange then only the two flange heights and bottom width are used to calculate the required girth.
- NEW - Application Rate by Girth facility (Basecoats Only) - A new facility has been added were you can select a Girth Start and End Range for the application rate calculations. You can also select to cost by the Lin.m with steel sections that appear in the Girth Band A range. You need to setup the Girth Range requirements in Set Report Options and then you can add the required costs to your cost centres or directly to your Project application rate facility.
- Intumescent Range
- Updated Products where required with CUB Register data.
- Promat International - Cafco Sprayfilm WB3 - Updated source of latest data.
- Spray Range
- Change of Supplier Name : Grace Construction Products Limited to GCP Applied Technologies
- No changes to this library.
Steelcalc Version 6.3.19 (12/05/2017) Released with Library 83 Update (08/05/2017)
- Bug Fix : The Replace facility was causing an error with users where commas are used for decimal places. Fixed
Steelcalc Version 6.3.18 (08/05/2017) Released with Library 83 Update (08/05/2017)
- Added a new facility in Replace and Amend Record for m² projects only You can now select an option where Steelcalc will recalculate the m² value when amending or replacing any steel section.
Please note that all other library updates will be applied at the same time so it does not matter if you have missed one. Please see above note with regards to licences.
- Intumescent Range
- New Product - International Paints Limited - Interchar 1290 - White water borne Intumescent.
- Neutron Fire Technologies Limited - Firebreak 303,305 and 306
- No changes to this library.
Steelcalc Version 6.3.17 (30/01/2017) Released with Library 82 Update (30/01/2017)
- Added new information details to the Product Data Information report. If a product has been registered in the ASFP Cellular Beam Register 10.01.2017 then the PDI report will display this information above the Fire Performance label.
Please note that all other library updates will be applied at the same time so it does not matter if you have missed one. Please see above note with regards to licences.
- Intumescent Range
- New Product - Sherwin Williams - Firetex FX9500 - Pale blue Epoxy intumescent.
- Nullifire - SC802 - Changes to loading data. Updated source and date information.
- Nullifire - SC901/2 - Changes to loading data. Updated source and date information.
- Nullifire - SC801-120 - Changes to loading data. Updated source and date information.
- Other changes include updates to all products that have been added to the ASFP Cellular Beam Register 10.01.2017
- Boards Range
- British Gypsum - Glasroc F Firecase - Updated Source data and Date.
- Promat UK Limited - Promatect 250 - Updated Source data and Date.
- Promat UK Limited - Supalux - Updated Source data and Date.
- Sprays Range
- Promat UK Limited - Cafco 300 - Updated Source data and Date.
- Sherwin Williams - Firetex FX1002, Firetex FX2002, Firetex FX5000, Firetex FX5002
- Bollom Fire Protection - Intusteel WB
- Promat UK Limited - Promatect 50
- No changes to this library.
Steelcalc Version 6.3.16 (08/11/2016) Released with Library 81 Update (08/11/2016)
Please note that all other library updates will be applied at the same time so it does not matter if you have missed one. Please see above note with regards to licences.
- Nullifire - SC802 - Changes to loading data. I-Sections now up to 1.5hrs. Updated source and date information.
- Nullifire - SC901/2 - Changes to loading data. Updated source and date information.
- Nullifire - SC801-120 - Changes to loading data. Updated source and date information.
- No changes to this library.
Steelcalc Version 6.3.15 (30/09/2016) Released with Library 80 Update (30/09/2016)
- New Product - PPG Protective & Marine Coatings - Steelguard 651. White water borne Intumescent coating.
- Amendment to steel size UPE 180 - Flange thickness changed from 9.5mm to 10.5mm
- No changes to this library.
Steelcalc Version 6.3.14 (07/07/2016) Released with Library 79 Update (07/07/2016)
- Major Change : Steelcalc has been updated to a newer Microsoft DotNet Framework 4.5. See notes in previous release for more details.
- Nullifire - Topseal amendments to Products. Carbothane 134HP changed to TS134
- PPG Protective & Marine Coatings - Steelguard 651. Correction to available steel sections in the Steelcalc catalogue.
Steelcalc Version 6.3.13 (04/07/2016) Released with Library 78 Update (04/07/2016)
- Major Change : Steelcalc has been updated to a newer Microsoft Dot Net framework 4.5.
- Nullifire - SC802 Added 90 Minute loading data to RHS/SHS sections.
- Nullifire - Topseal amendments to all Products.
- New Product - PPG Protective & Marine Coatings - Steelguard 651. White waterborne Intumescent coating.
Steelcalc Version 6.3.12 (25/04/2016) Released with Library 77 Update (25/04/2016)
- Jotun Paints (Europe) Limited - Steelmaster 120SB New loading data and update to Certifire certificate.
- Sherwin Williams - Firetex FX5090 Update to Certifire certificate and loadings.
- International Paints Limited Correction to Interchar 2090 RHS/SHS loading data.
- Sika Deutschland GmbH - Platinum 120 Changes to Hollow Sections 120 Minutes.
- No updates to this library. Please update to get the latest software updates.
Steelcalc Version 6.3.11 (07/04/2016) Released with Library 76 Update (07/04/2016)
- Reported Error : When updating older projects where certain steel types no longer existed for a product an error stopped the update from running correctly. Fixed
- Nullifire - Nullifire SC802 RHS/SHS, CHS and Cellular Beam data added to product.
- Name and Address change PPG Coatings Europe BV to PPG Protective & Marine Coatings, Trigate House, Birmingham.
- No updates to this library. Please update to get the latest software updates.
Steelcalc Version 6.3.10 (08/03/2016) Released with Library 75 Update (08/03/2016)
- Added more printer help support : New code added in to Steelcalc to support errors that may happen because of printers not correctly setup on users machines.
- Reported Error : When updating from a previous project an error occurred where a product that had been used in the project no longer exists in the new library. Fixed
- Unreported Error : Some systems could not delete records from the project grid if the product was no longer available in the library. Fixed
- Unreported Error : When entering the Product Supports Facility an error would occur if no A/V value had been assigned. Fixed
- Jotun Paints - Steelmaster 1200WF Source and Date information updated. New Loading Data entered.
- PPG Coatings Europe BV - Steelguard 564 Correction to Column Data for 30 & 60 Minute Loading Data.
- No updates to this library. Please update to get the latest software updates.
Steelcalc Version 6.3.9 (12/02/2016) Released with Library 74 Update (12/02/2016)
- Added New Steel Type : A new Channel as a Column, 4 Sided has been added to the steel types catalogue.
- New Product - Sika Deutschland GmbH - Unitherm Platinum 120. Epoxy Intumescent, Light grey.
- New Product - Nullifire - SC802. Thin film white, waterborne Intumescent.
- New Product - Sherwin-Williams - FX6000. Grey, fast drying and durable Intumescent.
- Firetherm - Firesteel 60WB Changes to loading data and properties.
- Firetherm - Firesteel WB120 Elite Source and Date information updated.
- PPG Coatings Europe BV - Steelguard 564 This product now includes loading data from Steelguard 562 and 563.
- Sika Deutschland GmbH - Unitherm Platinum Source and Date information updated. Updated Hollow Section loading data.
- International Paint Limited - Interchar 2060 Source and Date information updated.
- Jotun Paints - Steelmaster 60/120 Source and Date information updated.
- Nullifire - SC801-120 Changes to loading data.
- PPG Coatings Europe BV - Steelguard 551,552,553,554,561,562,563 and 2580
- Nullifire - S707-90
- Nullifire - S707-120
- Neutron Fire Technologies - Firebreak 307
- Neutron Fire Technologies - Firebreak 308
- Sherwin-Williams - FX7000 and FX8000
- New Product - PPG Coatings Europe BV - Steelguard 601 White waterborne thin film Intumescent.
- PPG Coatings Europe BV - Steelguard 552,553 and 554.
Steelcalc Version 6.3.8 (16/12/2015) Released with Library 73 Update (16/12/2015)
- Enhancement : Added new search options to the Products Supports Facility. The ability to search for a particular Steel Type, A/V, Hourly Protection or Product Type has been included in this already powerful search facility
- Enhancement : Improved container calculations for products that are supplied in a kit form.
- Unreported Error : Boards Cost Centre was unable to transfer costs from one product to another. Fixed
- Unreported Error : The Steel Types Radial Menu was not refreshing correctly if closed down while in an opened project. Fixed
- Sika Deutschland GmbH - Unitherm W-30. Source and Date information updated.
- Nullifire - SC901. Update container kit size.
- Nullifire - SC801. Cellular Beam included into Steel Type range.
- Tikkurila - Nonfire S104
- 3M E Wood - Scotchkote SPX730
- No updates to this library. Please update to get the latest software updates.
Steelcalc Version 6.3.7 (16/10/2015) Released with Library 72 Update (16/10/2015)
- Clients Report : The running project total has been redesigned to appear only when required and appear as Grand Project Total at the end of the report if more than one Product or hourly protection is used. You can also select not to print any running totals if required.
- #Hashtag Processing : Using the Steel ID cell of the Project Grid you can input a range of #Hashtag references which will make Steelcalc reconfigure the corresponding record line. By inserting a #Hashtag of #1, #2 or #3 you can put the record line into Abeyance or if you insert #R, #Y or #G then the record will be highlighted with a selected colour. You also have the option to disable the use of #Hashtag processing if required. See Grid Options in Steelcalc Help for more details.
- Highlight Marked Items : Your Marked items will now appear highlighted with a selected colour when selected in the Project Grid. You can also select if a double click is required to active a Marked item, the default is now a single click. See Grid Options in Steelcalc Help for more details.
Please note that all other library updates will be applied at the same time so it does not matter if you have missed one.
- New Product - Firetherm Limited - Firesteel SB120 Elite. Pale green solvent based Intumescent coating.
- New Product - Firetherm Limited - Firesteel 120WB Elite.Thin film waterborne Intumescent coating.
- Firetherm Limited - Firesteel 120WB
- No updates to this library. Please update to get the latest software updates.
Steelcalc Version 6.3.6 (21/08/2015) Released with Library 71 Update (21/08/2015)
- None reported Error : Steelcalc was unable to amend a Flange Only partial steel section. Fixed
- Sherwin Williams - Firetex FX5090 - Added RHS/SHS and CHS loading data.
- Nullifire - Topseal TS818 - Discontinued.
- Nullifire - Topseal changes to all products.
- Berger Paints Emirates Ltd Co (LLC) - Included several supplier names and addresses for their products based on the preferred location set in Steelcalc.
- PPG Industries (UK) Limited - Steelguard 751/851 - Corrections to loading data.
Steelcalc Version 6.3.5 (05/08/2015) Released with Library 70 Update (05/08/2015)
- New Product - Berger Paints Emirates Ltd Co (LLC) - Apochar WB105 - White waterborne Intumescent coating
- New Product - Berger Paints Emirates Ltd Co (LLC) - Apochar SB200 - White solvent based thin film Intumescent coating
- Nullifire - SC801-120 - Added Topseals to selectable range
- New Product - PPG Industries (UK) Limited - Steelguard 751/851 - White solvent borne Intumescent coating - On-Site (751) Off-Site (851).
- New Product - Lurie - Lurifer - White solvent based thin film Intumescent
Steelcalc Version 6.3.4 (17/07/2015) Released with Library 69 Update (17/07/2015)
- PPG Coatings Europe BV - Steelguard 751/851 - Correction to CHS loading data
Steelcalc Version 6.3.3 (16/07/2015) Released with Library 68 Update (16/07/2015)
You can get this update through your Steelcalc account. Click on the My Account at the top of this page and sign in to get your update or by using the Steelcalc Check for Updates facility which is under the drop down menu Help.
- New Product - Berger Paints Emirates Ltd Co (LLC) - Apcochar WB100 - White waterborne Intumescent coating
- New Product - Sherwin Williams - Firetex M95/02 - Pale blue Epoxy Intumescent
- New Product - Nullifire - SC801-120 - Thin film waterborne Intumescent
- PPG Coatings Europe BV - Steelguard 751/851 - Changes to loading data
- Jotun Paints (Europe) Limited - Steelmaster 1200WF - Changes to loading data
- Sherwin Williams - Firetex FX5062 - Changes to loading data
- Firetherm Limited - Firesteel 47-4 EXT
- Firetherm Limited - Firesteel 47-4
Steelcalc Version 6.3.2 (03/06/2015) Released with Library 67 Update (03/06/2015)
You can get this update through your Steelcalc account. Click on the My Account at the top of this page and sign in to get your update or by using the Steelcalc Check for Updates facility which is under the drop down menu Help.
- PPG Coatings Europe BV - Steelguard 751/851 - Amendment/Correction to 4 Sided Beams and Columns
Steelcalc Version 6.3.1 (18/05/2015) Released with Library 66 Update (18/05/2015)
- Improvements : Added new Steel Section Radial menu for quicker navigation to required Steel Types and Specials.
- Improvements : Added the ability to enter Data Entry inputs from the Steel Sizes Grid. Double click on the Steel size or click the row selector to activate.
- Unreported Error : Partial Plate Girders crashed when changing the t1 value to be higher than the height (h). Fixed.
- Unreported Error : Some products were not showing steel sizes for Partials. Fixed.
- Unreported Error : Wind bracing caused an error with users that do no not use the regional setting UK. Fixed.
- Reported Error : Project conversion to new Steelcalc project format 6.2 caused an error on some projects. The projects table structure had got corrupt. Fixed.
- Reported Error : Board Cost Centre would not update correctly with users that do not use the regional settings UK. Fixed.
- New Product - PPG Coatings Europe BV - Steelguard 751/851 - White Solvent borne Intumescent coating.
- International Paints - Interchar 2090 Changes to loading data.
- New Steel Sizes - Rectangular - 500x300x14.2, 500x200x 16.0, 14.2, 12.5, 10 and 8
- Unitherm Steel S - Sika Deutschland GmbH - Changes to uses wording only.
Steelcalc Version 6.2.0 (6/03/2015) Released with Library 65 Update (6/03/2015)
- New Project Format - To improve facilities within Steelcalc a new project format has been created. Any previously created projects will need to be updated to the new format.
- Improvement : The Totals and Report Builder will now display quantity requirements for each individual product including container quantities for Intumescents in the main display area.
- Material Report : Now showing Topseal data in the groups section of the report.
- New Product - International Paint Limited - Interchar 2090 - White Solvent borne Intumescent coating.
- Nullifire - SC901 - SC902 - Cellular Beam included Up to 2 hours.
- Sika Deutschland GmbH - Unitherm Platinum - RHS/SHS Data added up to 1 hour (Columns only).
- No changes to Products in this range
Steelcalc Version 6.1.12 (6/11/2014) Released with Library 64 Update (23/10/2014)
- Improvements for registering Steelcalc Licences : When registering a Steelcalc licence you can enter your email address into the security process and ask Steelcalc to search for the required details. The email address must match the email address that is set against your Steelcalc licence. An active Internet connection is required for this to work.
- No changes to Products in this range
- No changes to Products in this range
Steelcalc Version 6.1.11 (23/10/2014) Released with Library 64 Update (23/10/2014)
- Added - Rename Steelcalc Project - This facility enables you to rename any previously created Steelcalc Project. See Steelcalc Help for more details.
- New Product - PPG Coatings Europe BV - Steelguard 701/801 - White Solvent borne Intumescent coating.
- Jotun Paints (Europe) Limited - Steelmaster 1200WF - 4 Sided Beam data amended to match Certifire CF5243 revision 25th July 2014.
- No changes to Products in this range
Steelcalc Version 6.1.10 (02/10/2014) Released with Library 63 Update (02/10/2014)
- Enhancement - Specials Calculators - RHS/SHS, I Sections and Universal Columns as Beams - Integrated Plate - You can now select to have a slab on both sides when 1 Sided is selected.
- Enhancement - Specials Calculators - RHS/SHS - Shelf Angles - You can now select to have a slab on both sides when 1 Sided Shelf Angle is active.
- All Product Types (Intumescents, Sprays and Boards) where required have had their Source and Date information updated.
- Sherwin Williams - Firetex FX1003/2003 - Changes to loading data.
- Sherwin Williams - Firetex FX5060 - Changes to loading data.
- Sherwin Williams - Firetex M95 - Changes to loading data.
- Nullifire - SC902 - Changes to loading data.
- Nullifire - SC901 - Added as a New Product. Changes to loading data.
- Nullifire - S605 - Change to Specific Gravity.
- Nullifire - S606 - Change to Specific Gravity and Flash Point.
- Nullifire - S707-60 - Change to Specific Gravity and Volume Solid.
- Nullifire - S707-90 - Change to Specific Gravity and Volume Solid.
- Jotun Paints (Europe) Limited - Steelmaster 60/120 - Changes to loading data.
- Jotun Paints (Europe) Limited - Steelmaster 60SB - Changes to loading data and added RHS/SHS/CHS to loading range.
- PPG Coatings Europe BV - Steelguard FM549/550/560 - Changes to loading data.
- Promat International - Cafco SprayFilm WB3 - Changes to loading data.
- Rockwool Limited - FirePro Tube - Changes to loading data.
- No changes to Products in this range
Steelcalc Version 6.1.9 (06/08/2014) Released with Library 62 Update (06/08/2014)
- Enhancement - Set Report Options - Summary Reports - You can now select to hide the Quantity Required values and the Values and Totals information from Summary Reports.
- New Product : Firetex FX5062 - Sherwin Williams - White Water Based TCEP free thin film intumescent
- New Product : Steelmaster 1200WF - Jotun Paints (Europe) Limited - White waterborne acrylic thin film intumescent
- All Sherwin Williams products that used M71V3 Topseal have been changed to M71V2 Topseal
- PPG Industries (UK) Limited - Steelguard 701/801 - CHS data has been enabled
Steelcalc Version 6.1.8 (10/07/2014) Released with Library 61 Update (10/07/2014)
- Reported Error : Some countries had error trying to use the Cost Centre when a Spray project was open. Fixed
- Reported Error : Countries where a (,) comma is used as a delimiter caused an error in adding a new failure temp to an existing project. Fixed
- Reported Error : Some licence users could not use Estimators Assistant. Fixed
- Enhancement
- I-Sections Specials - Shelf Angle : The ability to create an Edge Beam No Wall has been added to the facility.
- Speed improvements to library data has been added.
- Speed improvements to library data has been added.
Steelcalc Version 6.1.7 (19/06/2014) Released with Library 60 Update (19/06/2014)
- Reported Error : Replace - When using the steel section facility more than once on the same steel section the DFT did not update correctly. Fixed
- Reported Error : When switching from Intumescents to Boards with Composite floor selected the active Board product did not show any thicknesses available. Fixed
- Reported Error : Estimators Assistant - You could not run the Totals and Reports facility. Fixed
- None Reported Error : If a Board project had available steel sections but none could be covered then when you tried to go into the Cost Adjuster an error would be shown. Fixed
- NEW : American Tee (WT) steel sections added to the Steelcalc steel sizes library.
- Nullifire : SC901/902 - Added CHS loading data to product
- Nullifire : SC901/902 - Change to Specific Gravity - Now 1.46 Kg/litre
- PPG Industries (UK) Limited - Name change for Steelguard 701 to Steelguard 701/801
Steelcalc Version 6.1.6 (02/06/2014) Released with Library 59 Update (02/05/2014)
- Several updates to projects stored on a server : Better handling of Projects when Steelcalc is no longer able to connect to the Project because the Project Server is no longer available for some unknown reason. If Steelcalc reports a Disk or Network error then you can exit Steelcalc directly from the Error resulting in less errors being shown as you close down.
- Improvement : You can now select Kgs or Litres as your project unit default before using the select all options when creating a new project.
- Reported Error : Invalid Characters found in Project Path - Certain characters cannot be used when creating a directory or filename like (<), (>), (") etc. Steelcalc will now check for these characters before updating the Recent Projects sections, if found then these Projects will not be added to the Recents Projects Menus.
No Changes to Library
Steelcalc Version 6.1.5 (02/05/2014) Released with Library 59 Update (02/05/2014)
- Steelcalc 6 - General Release : Steelcalc 6 is now available to all.
- Intumescents Range
- International Paints - Interchar 2060 - Added Cellular Beam availability to the Steel Sections
- Sherwin Williams - FX5090 - New loading data
- Sika Deutschland GmbH - Unitherm Platinum - I-Section data now up to 2hrs
- Sika Deutschland GmbH - W-30 - Change of name from Topaz
- Sprays Range
- New Product - Isolatek International (Europe) - Isolatek Type CP2 - Wet Cement based vermiculite spray
- New Product - Isolatek International (Europe) - Isolatek Type 300 - Wet Cement based vermiculite spray
- New Product - Isolatek International (Europe) - Isolatek Type MII - Wet Sprayed vermiculite cement based mix
- Promat UK Limited - Cafco Fendolite MII - Updated Source and latest data information details
- Boards Range
- Promat UK Limited - Promat TD - Updated Source and latest data information details
- Sika Deutschland GmbH - Jade
- Sika Deutschland GmbH - Unitherm Steel S - Added RHS/SHS Loading data to range
- New Product - PPG Industries (UK) Limited - Steelguard 701 - White solvent borne intumescent coating - on and off-site application
- New Product - PPG Industries (UK) Limited - Steelguard 702 - White solvent borne intumescent coating - on and off-site application. RHS/SHS/CHS data only
Steelcalc Version 6.1.4 (14/04/2014) Released with Library 58 Update (10/03/2014)
- Reported Error : Shared Projects losing data links when different version of Steelcalc are been used. Fixed
- Note : Users of Steelcalc 6.1.0.0 need to update Steelcalc using the My Account on this site. Please use your email address and password that was given to you in the latest release email.
- No Changes to the library
- No Changes to this library
Steelcalc Version 6.1.3 Released with Library 58 Update (10/03/2014)
- Non Reported Error : Corrupt data file in Check for Updates facility. Fixed
- Note : Users of Steelcalc 6.1.0.0 need to update Steelcalc using the My Account on this site. Please use your email address and password that was given to you in the latest release email.
- No Changes to the library
- No Changes to this library
Steelcalc Version 6.1.0 Released with Library 58 Update (10/03/2014)
- Major Release : Steelcalc has been updated to use the Microsoft .NET 4.0 Framework which can be used across Windows XP, Windows 7 and Windows 8.
- Speed improvements have been made to Steelcalc due to this change.
- All previous projects of Steelcalc (including Steelcalc 6) will need to be updated to a new format for Steelcalc 6.1. Once formatted these projects cannot be opened in older versions of Steelcalc.
- No Changes to the library
- No Changes to this library
Steelcalc Version 6.0.14 Released with Library 57 Update (14/01/2014)
- When entering a new record to the project grid (when using grid view option 1) it would sometimes show error 'Not enough context to add a new row. Either a row in this band or the parent band has to be active to provide for enough context.' Fixed
- New Product - International Paints - Interchar 1260 - White water based Intumescent
- Nullifire - Added Topseal TS819 to all available products.
- No Changes to this library
Steelcalc Version 6.0.13 Released with Library 56 Update (20/09/2013)
- Cost Centre could not update cost when a null value was entered : Fixed
- Steelcalc Explorer : Error :Key not found Parameter name: Steelcalc could not found a required object. Fixed
- Cost Adjuster : Error :Conversion from type 'DBNull' to type 'Double' is not valid. This error was caused due to a Null Value. Fixed
- Cost Adjuster : Error :Object reference not set to an instance of an object. This error was caused when deleting a record line. Fixed
- Steelcalc : Error :Index was out of range. Must be non-negative and less than the size of the collection. This error was due to Steelcalc being closed down while a project was loading. Fixed
- New Product - Sherwin Williams - FX5090 - White water based Intumescent
- Pyroplast ST-100 - Changed to Supplier - Sika Deutschland GmbH - Changes to loadings
- PPG Industries (UK) Limited - FM2570 Name changed to FM2580 - Changes to Volume Solids and Specific Gravity
- Sika Deutschland GmbH - Changes to Topseals on Products Unitherm Topas and Unitherm Safir
- Rentokil Initial Supplies - Albi-Steel Plus
- New Product - Sika Deutschland GmbH - Unitherm Steel W-30 - White water based Intumescent
- Sika Deutschland GmbH - Sika Steel S - Additions to loading data
- Sika Deutschland GmbH - Sika Platinum - Additions to loading data
Steelcalc Version 6.0.12 Released with Library 55 Update (1/08/2013)
- Included new facility in Clients report. You can now select to view costs by Lin.M. To activate this facility you need to open Set Reports Options and under the Clients Report tab select Show in Lin.M's. All cost are converted from the m² prices.
- Reported Error : Object reference not set to an instance of an object when clicking on the project grid with your left mouse button after all records have been deleted. Fixed
- No Changes to the library
Steelcalc Version 6.0.11 Released with Library 55 Update (19/07/2013)
- Changes to Web Update Control Panel : Changed the way Steelcalc connects to the Internet through a proxy server
- None Reported Error : Steelcalc Explorer would not show correctly while in Project Grid Cell Editing while the Specials Editors was active. New behaviour : You are unable to enter Project Grid Cell Editing when the Specials Editor is active. Fixed
- None Reported Error : While in Project Grid Cell Editing if you tried to select another Hourly Protection or Product then this request would be ignored, the Hourly Protection or Product would be selected but not used. New behaviour : You are now not able to change to another Hourly Protection or product while in Project Grid Cell Editing. Fixed
- None Reported Error : Users could create new groups in the Steelcalc Explorer or delete groups which would result in Steelcalc not being able to function correctly until Steelcalc was restarted. Fixed
- None Reported Error : A Key not found error could show on some machines when starting Steelcalc. Fixed
- No Changes to the library
Steelcalc Version 6.0.10 Released with Library 55 Update (4/07/2013)
- Error Reported : Unable to check for updates : Fix : Added new coding logic to help identify what the problem is.
- None Reported Error : Available Zones not refreshing correctly after deleting records. Fixed
- None Reported Error : Suggest facility in Project Grid not displaying correct information Fixed
- Addition : Web Update Control Panel : You now have the ability to use a proxy server. This facility can be found in the drop down menu Help
- No Changes to the library
Steelcalc Version 6.0.9 Released with Library 55 Update (26/06/2013)
- Error Reported : Object reference not set to an instance of an object : Using Project Grid
- Fix : Unable to replicate the error but have changed the code in the method to handle errors of this nature.
- No Changes to the library
Steelcalc Version 6.0.8 Released with Library 55 Update (17/06/2013)
- Integration of new Steelcalc web site into Steelcalc 6
- Change to desktop Icon
- General - Updates to several Certifire certificates
- International Paints - Change to contact details
- International Paints - Interchar 963 - Correction to loading data.
- Nullifire - S605 - Changes to loading data.
- Nullifire - S606 - Changes to loading data.
- Nullifire - S707-60 - Changes to loading data.
- Nullifire - Title changed
- Siniat Limited - Firecheck Board - Name Changed to - GTEC Fire Board
- Promat UK Limited - Supalux - Changes to loading data.
- Nullifire - New Product - SC901
- Note : This specialist product is only available to Contractors that have training and assessment
- British Gypsum Limited - GypLyner Encase
- International Paints - Interchar 404 - Changes to loading data.
- International Paints - Interchar 1160 - Changes to loading data.
Steelcalc Version 6.0.7 Released with Library 54 Update (26/03/2013)
- Added Primer details to summary information on Summary Extended Reports.
Steelcalc Version 6.0.6 Released with Library 53 Update (13th February 2013)
- Cost Centre basecoat costs not being transferred into project when 'Add Product to Project' was used. Fixed
- Added new Universal Beams to the American range of steel sizes.
- Leigh's Paints - Changes to company name. Changed to Sherwin-Williams Protective & Marine Coatings
- Quelfire - Quelcote 120 - Change to Specific Gravity and loading data.
- Quelfire - Topseal - Quelcote GW Topcoat - Change to DFT
- PPG Industries (UK) Limited - Steelguard FM4507
- Hilti AG - Steel Spray CFP-S WB
- Quelfire - Quelcote GW
Steelcalc Version 6.0.3 Released with Library 52 Update (24/10/2012)
- Bolloms Fire Protection - Product Name Changed Fireshield to Fireshield Ultra Universal - Changes to loading data.
- International Paints Limited : Interchar 1190 - Change to Volume Solid and changes to Hollow Section loading data.
- Sika Deutschland GmbH : Unitherm Platinum - Added CHS loading data.
- Hilti AG : Steel Spray CFP-S WB - Updated source of latest data and date.
- Leigh's Paints : Firetex FX5060 - Updated source of latest data and date.
- Leigh's Paints : Firetex FX5120 - Updated source of latest data and date.
- Jotun Paints (Europe) Limited : Steelmaster 60WB - Changes to loading data. Updated source of latest data and date.
- 3M E Wood : Scotchkote SPX710 - Withdrawn October 2012.
Steelcalc Version 6.0.0 New Release